Changing Volume and Brightness on Tuxedo Keypad (Older version)

Changing Volume and Brightness on Tuxedo Keypad (Older version)

1. Select tools icon in bottom left
   

1. You can now adjust basic system settings
   

• Related Articles

• Console Mode of Tuxedo Keypad (Older Firmware)

  Console Mode of Tuxedo Keypad (Older Firmware) Console mode is used to simulate a numeric keypad on the touch screen. This can be used to help see and clear troubles signals. Steps to Access Console Mode Select "Security" Select "More Choices" Select ...

• Ground Fault/Open Circuit on Keypad

  Ground Fault/Open Circuit on Keypad A ground fault on an alarm system usually means that there is a short somewhere in the system. It could be anything from a broken/cut wire to a bad sensor. It will always need a CIA technican scheduled to come ...

• Pro Series Panel Customer Guide

  Pro Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Press the arm button Select the arming mode Arm Away - The entire system is armed. Arm Home - Doors and windows are armed but motion detection won't be active. Type in your ...

• Lynx Series Panel Customer Guide

  Lynx Touch Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Stay + Code This would be for arming perimeter devices like glass break, or window and door sensors. Motion detection would be off and there is a delay until the system ...