Console Mode of Tuxedo Keypad (Older Firmware)

Console Mode of Tuxedo Keypad (Older Firmware)

Console Mode of Tuxedo Keypad (Older Firmware)

Console mode is used to simulate a numeric keypad on the touch screen. This can be used to help see and clear troubles signals.

Steps to Access Console Mode


  1. Select "Security"


  1. Select "More Choices"


  1. Select "Console Mode"


  1. You can now use the touch screen like a normal keypad. 



    • Related Articles

    • Changing Volume and Brightness on Tuxedo Keypad (Older version)

      Changing Volume and Brightness on Tuxedo Keypad (Older version) Select tools icon in bottom left You can now adjust basic system settings

    • Ground Fault/Open Circuit on Keypad

      Ground Fault/Open Circuit on Keypad A ground fault on an alarm system usually means that there is a short somewhere in the system. It could be anything from a broken/cut wire to a bad sensor. It will always need a CIA technican scheduled to come ...

    • Pro Series Panel Customer Guide

      Pro Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Press the arm button Select the arming mode Arm Away - The entire system is armed. Arm Home - Doors and windows are armed but motion detection won't be active. Type in your ...

    • Customer cheat sheet for security systems

      See the attached PDF for a quick reference on how to turn your system on and off, modify user codes, bypass zones, and other functions.

    • Vista Series Panel Customer Guide

      Vista Series Panel Customer Guide Arming and Disarming Alarm Panels Quick Arm If enabled, you can press [#] in place of the system's security code, plus the desired arming key (Away, Stay, Instant) For Example: # then 2 would arm the system for Away ...