Ground Fault/Open Circuit on Keypad

Ground Fault/Open Circuit on Keypad

Ground Fault/Open Circuit on Keypad

A ground fault on an alarm system usually means that there is a short somewhere in the system. It could be anything from a broken/cut wire to a bad sensor. It will always need a CIA technican scheduled to come onsite and make a repair.

    • Related Articles

    • Console Mode of Tuxedo Keypad (Older Firmware)

      Console Mode of Tuxedo Keypad (Older Firmware) Console mode is used to simulate a numeric keypad on the touch screen. This can be used to help see and clear troubles signals. Steps to Access Console Mode Select "Security" Select "More Choices" Select ...

    • Changing Volume and Brightness on Tuxedo Keypad (Older version)

      Changing Volume and Brightness on Tuxedo Keypad (Older version) Select tools icon in bottom left You can now adjust basic system settings

    • Lynx Series Panel Customer Guide

      Lynx Touch Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Stay + Code This would be for arming perimeter devices like glass break, or window and door sensors. Motion detection would be off and there is a delay until the system ...

    • Customer cheat sheet for security systems

      See the attached PDF for a quick reference on how to turn your system on and off, modify user codes, bypass zones, and other functions.

    • Vista Series Panel Customer Guide

      Vista Series Panel Customer Guide Arming and Disarming Alarm Panels Quick Arm If enabled, you can press [#] in place of the system's security code, plus the desired arming key (Away, Stay, Instant) For Example: # then 2 would arm the system for Away ...