How do I add user codes to my alarm system?
Your Name:
Company Name (If applicable):
Address:
Your pin code or verbal passcode:
New user's name:
New pin code:
Related Articles
Customer cheat sheet for security systems
See the attached PDF for a quick reference on how to turn your system on and off, modify user codes, bypass zones, and other functions.
Vista Series Panel Customer Guide
Vista Series Panel Customer Guide Arming and Disarming Alarm Panels Quick Arm If enabled, you can press [#] in place of the system's security code, plus the desired arming key (Away, Stay, Instant) For Example: # then 2 would arm the system for Away ...
Lynx Series Panel Customer Guide
Lynx Touch Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Stay + Code This would be for arming perimeter devices like glass break, or window and door sensors. Motion detection would be off and there is a delay until the system ...
Pro Series Panel Customer Guide
Pro Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Press the arm button Select the arming mode Arm Away - The entire system is armed. Arm Home - Doors and windows are armed but motion detection won't be active. Type in your ...
Ground Fault/Open Circuit on Keypad
Ground Fault/Open Circuit on Keypad A ground fault on an alarm system usually means that there is a short somewhere in the system. It could be anything from a broken/cut wire to a bad sensor. It will always need a CIA technican scheduled to come ...