Lynx Series Panel Customer Guide
Lynx Touch Series Panel Customer Guide
Arming and Disarming Alarm Panels
Arming Stay
| + Code |
This would be for arming perimeter devices like glass break, or window and door sensors. Motion detection would be off and there is a delay until the system is active.
Arming Away
| + Code |
This arms the entire system and has a delay to allow egress.
Restart Exit Delay
Allows extra time to leave the premises by restarting the delay timer.
Disarming
| + Code |
This disarms the entire system and silences alarms.
Check Status
This shows you the status of the system, for example if any doors or windows are open.
Bypassing Zones
Bypass Zones
| + Code |
This ignores selected zones during the next time you arm the system.
Setting Chime to On or Off
Chime On or Off
| + Chime |
Related Articles
Vista Series Panel Customer Guide
Vista Series Panel Customer Guide Arming and Disarming Alarm Panels Quick Arm If enabled, you can press [#] in place of the system's security code, plus the desired arming key (Away, Stay, Instant) For Example: # then 2 would arm the system for Away ...Pro Series Panel Customer Guide
Pro Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Press the arm button Select the arming mode Arm Away - The entire system is armed. Arm Home - Doors and windows are armed but motion detection won't be active. Type in your ...LYNX 5210 CHIME
Sound chime and voice when door or window is opened while the system is disarmed 1. Press SECURITY then press the bottom right MORE tab 2. Press SETTINGS then press VOICE or CHIME button to enable or disable 3. Press SAVE to save and exit then press ...Customer cheat sheet for security systems
See the attached PDF for a quick reference on how to turn your system on and off, modify user codes, bypass zones, and other functions.