Pro Series Panel Customer Guide

Pro Series Panel Customer Guide

Arming and Disarming Alarm Panels

      Arming

1. Press the arm button
   

1. Select the arming mode
   
1. Arm Away - The entire system is armed.
   
2. Arm Home - Doors and windows are armed but motion detection won't be active.
   

1. Type in your panel code
   

      Disarming

1. Press the disarm button
   

1. Type in you panel code - Once disarmed the system will display the status of the system.
   

Bypassing Zones

      Bypass Zone

1. Press the bypass & arm button
   

1. Finish the arming process - Bypassed zones reset after the alarm is disarmed again. 
   

Setting Chime On or Off

      Chime On or Off

1. Press the horizontal bar at the top of the home screen
   
2. Toggle the chime on or off and adjust the volume as preferred
   

• Related Articles

• Vista Series Panel Customer Guide

  Vista Series Panel Customer Guide Arming and Disarming Alarm Panels Quick Arm If enabled, you can press [#] in place of the system's security code, plus the desired arming key (Away, Stay, Instant) For Example: # then 2 would arm the system for Away ...

• Lynx Series Panel Customer Guide

  Lynx Touch Series Panel Customer Guide Arming and Disarming Alarm Panels Arming Stay + Code This would be for arming perimeter devices like glass break, or window and door sensors. Motion detection would be off and there is a delay until the system ...

• LYNX 5210 CHIME

  Sound chime and voice when door or window is opened while the system is disarmed 1. Press SECURITY then press the bottom right MORE tab 2. Press SETTINGS then press VOICE or CHIME button to enable or disable 3. Press SAVE to save and exit then press ...

• Customer cheat sheet for security systems

  See the attached PDF for a quick reference on how to turn your system on and off, modify user codes, bypass zones, and other functions.